Pleated filter - Professional sinter plate filter Manufacturer

Delta2 - Herding Sinter Plate Filter Media For Dust Collector

2024-08-31

The lastest type of Sinter Plate Filter Element (recommended): Delta2 Series Germany Originated + Imported Materials + Technology Innovation Certified by German laboratory. The base body (rigid) is sintered plate with hydrophobic PTFE coating which is securely embedded in the base body. With it’s special features of DELTA² filters ,it can be installed not only in vertical arrangement on both the raw gas and clean gas side but also in horizontal arrangement . Features/Advantages Germany Originated + Imported Materials + Technology Innovation Certified by German laboratory. 1. High filtration grade: Can deal with 0.1μm particle size.2. High filtration efficiency: 99.999% @ 1μm, emission<<1 mg/Nm3 (DMT certified).3. Super long service time: PE matrix + PTFE coating, rigid body and embedded coatingwhich is hard to be worn or torn, performance guaranteed, and service life is expected≥ 10 years.4. Surface-filtration, constant resistance, design air volume is stable.5. Discharge indoors, large energy saving, equipment investment can be recovered in 2~3 years.6. PE and PTFE material, strong acid, alkali and humidity resisting.7. Washable, repairable;8. Fiber free, lint free, environmental-friendly materials, no pollution to products (FDA Compliant).9. PWIS-free.10. Anti-static type available...

Sinter plate dust collector principle（1）

2024-08-14

A filter plate was used instead of the bag, and the filter plate was a sintered thin plate (also referred to as “sintered plate”). The working principle of the sintered plate dust collector is that the dust-containing gas enters the filter plate filtration zone of the tank from the air duct. When the dust-containing gas passes through the plastic burning board from the outer surface of the sintered plate, the dust is retained on the surface of the sintered plate. On the coating, the clean gas passes through the sintered plate, and enters the clean room of the box through the filter plate port and is discharged by the air outlet. The dust attached to the outer surface of the sintered plate will fall into the ash below with the pulse backflushing or gravity. Fight. For dust above 0.2μm, the efficiency is extremely high as high as 99.99%, the emission concentration is <1mg/m3; the stable resistance PTFE microporous coating film enables the surface filtration of the dust removal process; the equipment resistance is constant during the operation, and the facility...