Herding HSL1500 18 - Professional sinter plate filter Manufacturer

Sintered Plate - HSL 1500／18 NT1

2024-08-31

XDHD HSL Plate Filter Elements Replacement Herding HSL type. Sintered Filter Media Panels filter technology bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions and enables absolutely sort- and contamination-free material recovery. This increases directly your productivity.Lowest clean gas values, absolutely constant operating conditions, highest availability and energy efficiency are key features of the innovative technology. Sintered PE Surface filter elements show extreme durability and, depending on the process, long service life times of more than 15 years. Thereby the filters make a valueable contribution to environmental protection and sustainability.Sintered PE Surface filter elements have proven themselves for decades in effective and safe particle separation in almost all areas of industry . Even with finest grain sizes, energy-efficient air recirculation is possible in most cases, proven even with toxic dust. Features/Advantages Product Advantages: Longest service life of sintered plates up to 10 years Long service life, relatively low maintenance and consumables costs ...

The plicated design of the sinter-plate filter have big filtration area

Replacement of Herding Sintered Filter Media Panels

2024-08-22

UHMW-PE Sinter-plate filter advantages Sintered Filter Media Panels filter technology bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions and enables absolutely sort- and contamination-free material recovery. This increases directly your productivity. Lowest clean gas values, absolutely constant operating conditions, highest availability and energy efficiency are key features of the innovative technology. Sintered PE Surface filter elements show extreme durability and, depending on the process, long service life times of more than 15 years. Thereby the filters make a valueable contribution to environmental protection and sustainability. Sintered PE Surface filter elements have proven themselves for decades in effective and safe particle separation in almost all areas of industry . Even with finest grain sizes, energy-efficient air recirculation is possible in most cases, proven even with toxic dust. Sinter plate filter Advantages Pure surface filtration due to PTFE embedded in the PE-matrix and non-flexible filter media No penetration and deposition of dust particles in pores Rigid body design No wear and tear on the media due to movement (contraction during suction, expansion during cleaning)Long operational life time up...

The sintering plate substrate is made of special polymer composite materials

PE sinter plate

2024-08-21

The sintering plate substrate is made of special polymer composite materials, which are mixed by screening compatibility.Made from an advanced sintering process, the molded substation has irregular and fully-connected micron micro-holes.These micro-holes allow only clean gas to pass through, and microparticle dust is intercepted on its surface for dust filtration.In addition, the surface of the sintering plate becomes denser, smoother, and more accurate filtration through advanced sintering processes.At the same time, effectively prevent the work of dust sticky, and the use of gas pulse technology for automatic ash removalThe pressure loss remains stable. High Filtration Accuracy: The emission concentration is much less than 1mg/Nm3 One-piece molding design： Using advanced sintering technology to create an extraordinary one-in-one finished product (no bonding). Excellent Mechanical Performance: High rigidity and high toughness filter material which can be extreme wear resistance. Will extend service life and be used wildly without restriction. Environmental filter： No addition of PTFE coating – no need to worry about the coating will fall off and reduced filtration efficiency. No PTFE cause environmental pollution. No resin added – no need to...

Multi-tube PE sinter plate

2024-08-21

The main body of the sintered plate uses a variety of polymer compound powders to mix due to the manufacturing process.It is sintered, and the surface is covered with a microporous PTFE membrane for surface filtration. During the filtration process, dustis intercepted on the membrane and does not penetrate into the body of the sintered tube, and is superficially cleaned by powerful pulses,Therefore, it will not block the main body, resulting in a very high filtering effect and no decay. The sintered plates not only maintain low-pressure drop but also ensure up to 99.9% high separation efficiency and low emission concentration; The strong and rigid body has sturdiness and wear resistance that other filter materials cannot achieve.

Sinter-plate filter adopts polymer composite

Plastic sintered filtration products

2024-08-17

The sinter-plate is the main filter element in the sinter board dust catcher and carries out the gas-solid separation task in plastic sintered plates for dust removers. Sinter-plate filter adopts polymer composite and is formed by being sintered by a special high temperature furnace. The formed matrix has a complete micron-sized micropore, which only allows gas to pass through and intercepts microparticle at its surface to achieve dust removal filter effect. At the same time, enhanced PTFE resin film is covered at the surface of sinter-plate, which has strong self-clean function and can effectively avoid dust adhesion during work. By the use of gas recoil technology, it can automatic remove the dust and keep stable wind resistance loss. The structure of sinter-plate is usually rectangular. The filter part is wavy plate structure, which can increase the effective area of dust removal. Performance feature: High filtration accuracy —— Micron-sized filter aperture can effectively capture the dust above 0.1μm; The capture efficiency can reach to 99.9999% for the dust above 10μm. Better air permeability —— Advanced sintering technology and improved ingredient formulation...

sinterplatten filter adopts polymer composite

HSL Sinter Plated Filter, Herding Type HSL 1500/18, Herding HSL, Herding HSL1500 18

2024-08-17

HSL Sinter Plated Filter, Herding Type HSL 1500/18, Herding HSL, Herding HSL1500 18, Sinter Plate Tech filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side. N: Normal; A: Anti-static.T1: Less than 70°C; T2: Less than 100°C.For example, Delta2 1500 AT1 means length1500mm, anti-static, less than 70°C filter element. Features/Advantages Longest service life of sintered plates up to 10 years Long service life, relatively low maintenance and consumables costs Optimized geometry reduces pressure drop Increased pleats in each chamber significantly increase filter area Constant...

sinterplatten filteri much better than bag type dust collector

Sinter plate dust collector principle（2）

2024-08-14

Widely adapt to all dust, it is more advantageous for sodium-grade ultra-fine dust, and the original concentration of raw dust can be less than 500mg/m3cc, which can save the system’s pre-dusting equipment; good moisture resistance and trace oil resistance, It treats condensed condensation dust and moisture-absorbent water and dust coexisting dust, including special chemical dust and water mist; it is not affected by dust particle size and specific resistance, it can prevent static electricity and the dust removal efficiency is stable. The cleaning control system generally adopts an intelligent control system, adopts a unique compressed air backflushing device, and the original design of the inner cavity backflushing structure of the filter plate ensures higher cleaning efficiency and greatly reduces the soft filter bag pair. The reduction of compressed air energy saves the amount of compressed air; the door is opened on the side, the maintenance is very convenient, the replacement of the filter plate can be completed by removing one bolt; the electromechanical integration control equipment is used, and the facility operation is fully automated and intelligently monitored; Compared with...

Sintered Plate (XDHD)-Replacement for Herding HSL Type

2024-08-08

HSL standard element: for operating temperature below 70'C(instaneous 80°C max.) HSL-C element: for operating temperature below 100'C(instaneous 110°C max.) HSL filter element for surface filtration grant clean gas values of< 1 mglm', even with dusts of D50 < lµm. The matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. The sinter plate filters are extremely stable in structure, rigid, water resistant and only need low-maintenance. The average useful life of HSL filter element can even exceed 10 years. HSL filter element show a very high efficiency of separation and environmental compatibility. The filters can be recycled without any problems, no toxic waste has to be disposed off.

HSL Sinter Plated Filter, Herding Type HSL 1500/8

2024-08-04

Replacement Herding HSL type. Sintered Filter Media Panels filter technology bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions and enables absolutely sort- and contamination-free material recovery. This increases directly your productivity.Lowest clean gas values, absolutely constant operating conditions, highest availability and energy efficiency are key features of the innovative technology. Sintered PE Surface filter elements show extreme durability and, depending on the process, long service life times of more than 15 years. Thereby the filters make a valueable contribution to environmental protection and sustainability.Sintered PE Surface filter elements have proven themselves for decades in effective and safe particle separation in almost all areas of industry . Even with finest grain sizes, energy-efficient air recirculation is possible in most cases, proven even with toxic dust. Features/Advantages Sinter plate filter Advantages Pure surface filtration due to PTFE embedded in the PE-matrix and non-flexible filter media No penetration and deposition of dust particles in pores Rigid body design No wear and tear on the media due to movement (contraction during suction, expansion during cleaning)Long operational life...

Wholesale Professional Design PTFE Coating - Sinter plate filter - HSL type - Plastic Sintered Plate - Sinter Plate Tech

2024-08-04

Wholesale Professional Design PTFE Coating - Sinter plate filter - HSL type - Plastic Sintered Platefilter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side. Features/Advantages Product Advantages: Longest service life of sintered plates up to 10 years Long service life, relatively low maintenance and consumables costs Optimized geometry reduces pressure drop Increased pleats in each chamber significantly increase filter area Constant pressure drop keeps airflow constant, helping to improve equipment efficiency ...

Additive Manufacturing/3D Printing

2023-08-21

Safe filtration during powder bed fusion --In the field of additive manufacturing, the metallic raw materials are in most cases highly reactive and place maximum demands on sustainable safe handling. The reactive particle loads must therefore not enter the atmosphere of the production room. However, condensate and dust should not remain in the building chamber either as the quality of a build job in almost all additive manufacturing processes is directly related to the degree of embedded contamination and foreign particles.The optimum solution is offered by the realization of pure surface filtration with the our Sinter-Plate Filters in combination with safe, consistent passivation as well as integration into the inert gas circuit of the systems.

Ceramics Production

2023-08-21

--Safe separation of fine quartz dust is necessary during ceramics production processesOur Sinter-Plate Filter bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions, reliably separates even the finest dust fractions, and directly increases your productivity.