PE Sintering Filter - Page 2 - Professional sinter plate filter Manufacturer

Sinter plate dust collector principle（1）

2024-08-14

A filter plate was used instead of the bag, and the filter plate was a sintered thin plate (also referred to as “sintered plate”). The working principle of the sintered plate dust collector is that the dust-containing gas enters the filter plate filtration zone of the tank from the air duct. When the dust-containing gas passes through the plastic burning board from the outer surface of the sintered plate, the dust is retained on the surface of the sintered plate. On the coating, the clean gas passes through the sintered plate, and enters the clean room of the box through the filter plate port and is discharged by the air outlet. The dust attached to the outer surface of the sintered plate will fall into the ash below with the pulse backflushing or gravity. Fight. For dust above 0.2μm, the efficiency is extremely high as high as 99.99%, the emission concentration is <1mg/m3; the stable resistance PTFE microporous coating film enables the surface filtration of the dust removal process; the equipment resistance is constant during the operation, and the facility...

Donaldson SINTERED ANTI-STATIC LP 1A43399022U-000-440

2024-08-12

PANEL CSI 1200/8 SINTERED ANTI-STATIC W 440 MM X L 1260 MM X T42 MM SS WITHOUT SILICONE Tetratex on Polyethylene Sintered Standard Element.HERDING 8 TROUS + JOINT.DCE DONALDSON SINTAMATIC Dust Collector - CSI-20B.Dce Sintamatic dust Filter Cartridge equiv element su80 s300 sintermatic CSI-style Panel Filter in Sintered Anti-Static, 440 mm wide x 1260 mm long x 42 mm deep; Special feature: Earthed with Stainless Steel and without Silicone for CSI 1200/8 and other brands of collectors. Attributes Length 49.61 inch (1260 mm) Width 17.32 inch (440 mm) Depth 1.65 inch (42 mm) Filter Area 25.83 ft² (2.4 m²) Media Type Sintered Anti-Static Temperature Limit 140 °F (60 °C) Construction Stainless Steel End Cap Construction Open/Closed Shape Rectangle Anti-Static Yes Earthed Yes

Delta2type - Herding Sinter Plate Filter - Herding Filtration Llc

2024-08-12

Herding Filtration Llc - Manufacturers, Factory, Suppliers From China The lastest type of Sinter Plate Filter Element (recommended): Delta2 Series Germany Originated + Imported Materials + Technology Innovation Certified by German laboratory. The base body (rigid) is sintered plate with hydrophobic PTFE coating which is securely embedded in the base body. With it’s special features of DELTA² filters ,it can be installed not only in vertical arrangement on both the raw gas and clean gas side but also in horizontal arrangement. Features/Advantages Germany Originated + Imported Materials + Technology Innovation Certified by German laboratory. 1. High filtration grade: Can deal with 0.1μm particle size.2. High filtration efficiency: 99.999% @ 1μm, emission<<1 mg/Nm3 (DMT certified).3. Super long service time: PE matrix + PTFE coating, rigid body and embedded coatingwhich is hard to be worn or torn, performance guaranteed, and service life is expected≥ 10 years.4. Surface-filtration, constant resistance, design air volume is stable.5. Discharge indoors, large energy saving, equipment investment can be recovered in 2~3 years.6. PE and PTFE material, strong acid, alkali and humidity resisting.7. Washable, repairable;8. Fiber free, lint free, environmental-friendly materials,...

Replacement for DELTA-Sinter Plate Filter-Plastic Sintered Plate

2024-08-08

Sinter Plate Filter Element - Sintered Plate Filter - Replacement for Herding DELTA type filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side. Comparing to conventional filter media： no movement in the filter media; no wear. Features/Advantages Longest service life of sintered plates up to 10 years Long service life, relatively low maintenance and consumables costs Optimized geometry reduces pressure drop Increased pleats in each chamber significantly increase filter area Constant pressure drop keeps airflow constant,...

Sintered Plate (XDHD)-Replacement for Herding HSL Type

2024-08-08

HSL standard element: for operating temperature below 70'C(instaneous 80°C max.) HSL-C element: for operating temperature below 100'C(instaneous 110°C max.) HSL filter element for surface filtration grant clean gas values of< 1 mglm', even with dusts of D50 < lµm. The matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. The sinter plate filters are extremely stable in structure, rigid, water resistant and only need low-maintenance. The average useful life of HSL filter element can even exceed 10 years. HSL filter element show a very high efficiency of separation and environmental compatibility. The filters can be recycled without any problems, no toxic waste has to be disposed off.

Sinter-Plate Filter, Manufacturers, Factory, Suppliers From China

2024-08-04

Sinter Plate Filter used for Dust Collector Equipment,pure surface filter Introducing the Sinter-plate Filter Board Surface Air Filter, a groundbreaking innovation in dust collection systems. Crafted from rigid PE sintering material as its core, this filter is enhanced with a PTFE coating, delivering exceptional surface air filtering capabilities. Dust collection systems equipped with this advanced sinter-plate filter offer unparalleled performance in separating dust particles and aerosols from gaseous media within industrial settings. Its design is tailored to meet the demanding requirements of various industrial operations, ensuring a cleaner and safer working environment. Sintering Plate Filter are specifically designed for high filtration efficiency and low pressure drop. The monolithic design is also very strong and durable, making it ideal for a variety of applications. Product Advantages: Longest service life of sintered plates up to 10 yearsLong service life, relatively low maintenance and consumables costsOptimized geometry reduces pressure dropIncreased pleats in each chamber significantly increase filter areaConstant pressure drop keeps airflow constant, helping to improve equipment efficiencySurface filtration for high separation efficiencyMonoblock sintered plate design for compact rigiditySuitable for abrasive dustsCompletely fiberless...

Cartridge-Sinter Plate Filter Elements

2024-08-04

Combining the revolutionary materials of dry-filtration technology with bag filters: Sinter Cartridges. PE (polyethylene) porous matrix and PTFE embedded coating, pure surface filtration, efficient wear-resistant sinter plate filtration media with the wave-shaped cylindrical structure, the perfect alternative to bags and its cage.Using bag filter, it has the problems of discharge over standard, deducting air volume decreased and changing cloth bag frequently,ect. Through the simple and easy -to-use sinter cartridge, it is easy to solve these difficult problem. Features/Advantages For bag filter upgrade at minimum cost: Sinter-Cartridge: LT Series Reduce downtime.Reduce operation cost.Meet emission standards.Maximize dust collector capacity.Prolong dust collector service life. Is the old bag filter not easy to use? Does your bag filter discharge over standard? Has the dedusting air volume decreased significantly? Do you need to change cloth bags frequently? We provide you with the appropriate solution, through the simple and easy-to-use sinter-cartridge, to solve your difficult problems. Combination of revolutionary dry filtration technology material and bag filter: sinter-cartridge PE porous matrix + PTFE embedded coating, pure surface-filtration, high-efficiency and wear-resistant sintered filter media, with wave shaped cylinder structure, perfectly...

HSL Sinter Plated Filter, Herding Type HSL 1500/8

2024-08-04

Replacement Herding HSL type. Sintered Filter Media Panels filter technology bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions and enables absolutely sort- and contamination-free material recovery. This increases directly your productivity.Lowest clean gas values, absolutely constant operating conditions, highest availability and energy efficiency are key features of the innovative technology. Sintered PE Surface filter elements show extreme durability and, depending on the process, long service life times of more than 15 years. Thereby the filters make a valueable contribution to environmental protection and sustainability.Sintered PE Surface filter elements have proven themselves for decades in effective and safe particle separation in almost all areas of industry . Even with finest grain sizes, energy-efficient air recirculation is possible in most cases, proven even with toxic dust. Features/Advantages Sinter plate filter Advantages Pure surface filtration due to PTFE embedded in the PE-matrix and non-flexible filter media No penetration and deposition of dust particles in pores Rigid body design No wear and tear on the media due to movement (contraction during suction, expansion during cleaning)Long operational life...

Sitner Plate Tech - Long service life - Micron Filtration - For pulse jet dust collector

2024-08-04

Sinter-plate dust collector uses a unique wave type sinter-plate filter element to replace the traditional cloth bag. Because the sinter-plate is a rigid structure, will not deform, and has no framework wear, it has a long service life. Under some working conditions, its service life is more than 10 times that of the cloth bag. Due to the deep treatment of the surface of the sinter-plate, the pore diameter is small and uniform, with hydrophobicity, and it is not easy to adhere the dust with high water content, so the sinter-plate dust collector is the best choice when dealing with the dust with high water content and fibrous dust. In addition, as the high-precision manufacturing process of the sinter-plate maintains a uniform micron aperture, it can also handle ultra-fine dust and high concentration dust.The inlet concentration of the bag filter is generally less than 20 g / m3, while the inlet concentration of the sinter-plate dust collector can reach 500 g / m3. The utility model can simplify the two-stage dust collection into the first stage dust collection, which is...

Wholesale Professional Design PTFE Coating - Sinter plate filter - HSL type - Plastic Sintered Plate - Sinter Plate Tech

2024-08-04

Wholesale Professional Design PTFE Coating - Sinter plate filter - HSL type - Plastic Sintered Platefilter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side. Features/Advantages Product Advantages: Longest service life of sintered plates up to 10 years Long service life, relatively low maintenance and consumables costs Optimized geometry reduces pressure drop Increased pleats in each chamber significantly increase filter area Constant pressure drop keeps airflow constant, helping to improve equipment efficiency ...

Additive Manufacturing/3D Printing

2023-08-21

Safe filtration during powder bed fusion --In the field of additive manufacturing, the metallic raw materials are in most cases highly reactive and place maximum demands on sustainable safe handling. The reactive particle loads must therefore not enter the atmosphere of the production room. However, condensate and dust should not remain in the building chamber either as the quality of a build job in almost all additive manufacturing processes is directly related to the degree of embedded contamination and foreign particles.The optimum solution is offered by the realization of pure surface filtration with the our Sinter-Plate Filters in combination with safe, consistent passivation as well as integration into the inert gas circuit of the systems.

Automotive Industry

2023-08-21

--The automotive industry has never been so competitive, and manufacturers face more challenges than ever. Managing a factory floor today is more than just a matter of keeping the line moving. Air quality regulations and the need to maintain a safe and clean workplace require constant vigilance. Highly efficient filtration is essential in the Automotive Industry. Our Sinter-Plate Filters base on pure surface filtration and combine very high separation efficiency with unparalleled durability. Even the finest particle fractions are reliably separated on the basis of pure surface filtration.