nkpluse jet dust - Professional sinter plate filter Manufacturer

Sinter plate dust collector principle（1）

2024-08-14

A filter plate was used instead of the bag, and the filter plate was a sintered thin plate (also referred to as “sintered plate”). The working principle of the sintered plate dust collector is that the dust-containing gas enters the filter plate filtration zone of the tank from the air duct. When the dust-containing gas passes through the plastic burning board from the outer surface of the sintered plate, the dust is retained on the surface of the sintered plate. On the coating, the clean gas passes through the sintered plate, and enters the clean room of the box through the filter plate port and is discharged by the air outlet. The dust attached to the outer surface of the sintered plate will fall into the ash below with the pulse backflushing or gravity. Fight. For dust above 0.2μm, the efficiency is extremely high as high as 99.99%, the emission concentration is <1mg/m3; the stable resistance PTFE microporous coating film enables the surface filtration of the dust removal process; the equipment resistance is constant during the operation, and the facility...

Sitner Plate Tech - Long service life - Micron Filtration - For pulse jet dust collector

2024-08-04

Sinter-plate dust collector uses a unique wave type sinter-plate filter element to replace the traditional cloth bag. Because the sinter-plate is a rigid structure, will not deform, and has no framework wear, it has a long service life. Under some working conditions, its service life is more than 10 times that of the cloth bag. Due to the deep treatment of the surface of the sinter-plate, the pore diameter is small and uniform, with hydrophobicity, and it is not easy to adhere the dust with high water content, so the sinter-plate dust collector is the best choice when dealing with the dust with high water content and fibrous dust. In addition, as the high-precision manufacturing process of the sinter-plate maintains a uniform micron aperture, it can also handle ultra-fine dust and high concentration dust.The inlet concentration of the bag filter is generally less than 20 g / m3, while the inlet concentration of the sinter-plate dust collector can reach 500 g / m3. The utility model can simplify the two-stage dust collection into the first stage dust collection, which is...