Sinter plate dust collector principle(1)

Date: 2024-08-14 Categories: Industry informationNews center Views: 365

A filter plate was used instead of the bag, and the filter plate was a sintered thin plate (also referred to as “sintered plate”).

PE substrate+PTFE coating,Anti-static,

The working principle of the sintered plate dust collector is that the dust-containing gas enters the filter plate filtration zone of the tank from the air duct. When the dust-containing gas passes through the plastic burning board from the outer surface of the sintered plate, the dust is retained on the surface of the sintered plate. On the coating, the clean gas passes through the sintered plate, and enters the clean room of the box through the filter plate port and is discharged by the air outlet. The dust attached to the outer surface of the sintered plate will fall into the ash below with the pulse backflushing or gravity. Fight. For dust above 0.2μm, the efficiency is extremely high as high as 99.99%, the emission concentration is <1mg/m3; the stable resistance PTFE microporous coating film enables the surface filtration of the dust removal process; the equipment resistance is constant during the operation, and the facility is lowered. Operating cost; no rigid structure with skeleton to achieve long life; filter plate has long trouble-free operation time and is maintenance-free for 5 years.

HSL1500 18,Herding,Dust Collector,Sinter Cartridge